2012 Aprilia Shiver 750 Review and Specifications
2012 Aprilia Shiver 750
The Aprilia naked which astonished the world with stylistic and technological content which was so fresh and new that it was inaccessible to the direct competition, confirms the leadership it has built thanks to its strong personality, riding pleasure and ergonomic features.
The 2012 Aprilia Shiver 750 with An innovative engine fitted with latest generation integral Ride by Wire, a multimap, a first-rate chassis which is able to satisfy all levels of riders, and technical outfit that no other bike even comes close to. Aprilia Shiver 750 is without a doubt the benchmark bike for medium engine capacity naked.
The 2012 Aprilia Shiver 750have coloring with a new graphic (Bianco Glam and Nero Aprilia), the "wavy" discs and the sporty rider foot pegs are just a few of the signals which Shiver gives off to the beholder. The line remains very streamline and Italian and thanks to the clever use of the new colors and graphics, Shiver moves up a few notches as far as balance and aggression are concerned, highlighting some techniques that really make a difference, such as, for instance, the side shock absorber or the mixed steel trellis frame and aluminum plates.
with V90 engine The Aprilia Shiver 750 have the result of the extensive experience Aprilia has in high performance mechanics. Thanks to its peculiar technical features the Aprilia twin-cylinder is able to combine an exceptionally high level of output with maximum exploitation rates and user-friendly riding options. The research conducted to reach top performance levels in its category has led to the decision to adopt some advanced cutting-edge technical solutions. Generous torque is always available throughout the entire range of rpms, minimal vibrations, full output and power at the top of its category... all characteristics of the Aprilia Shiver 750.
Aprilia Shiver naturally confirms the integrated mulch-map Ride by Wire technology which evolves further, also taking advantage of the racing experience gained from the RSV4 super bike. This technical solution obviously represents the state-of-the-art version of engine control systems and Aprilia Shiver 750 confirms its technological leadership position in its sector.
2012 Aprilia Shiver 750 - Specifications
Engine type
- Aprilia V90 Longitudinal two cylinder 90° V, 4 stroke, liquid cooled, double overhead shaft timing controlled by a mixed gear/chain system, four valves per cylinder.
- Fuel Unleaded Petrol
- Bore and stroke 92 x 56.4 mm
- Total engine capacity 749.9 cc
- Compression ratio 11: 1
- Max power at the shaft 95 HP at 9,000 rpm
- Max torque at the shaft 8.25 kgm at 7,000 rpm
- Fuel system Ride by Wire integrated engine control system.
- Ignition Digital electronic ignition integrated with injection system.
- Starter Electric
- Exhaust 2 in 1 system made entirely of stainless steel with three way catalytic converter and lambda probe
- Alternator 450 W at 6,000 rpm
- Lubrication Wet sump
Gearbox 6 speeds, drive ratio:
- 1st 36/14 (2.57)
- 2nd 32/17 (1.88)
- 3rd 30/20 (1.5)
- 4th 28/22 (1.27)
- 5th 26/23 (1.13)
- 6th 25/24 (1.04)
- Clutch Multiple discs in oil bath with hydraulic control
- Primary drive Straight cut gears, drive ratio: 60/31 (1.75)
- Secondary drive Chain. Gear ratio: 16/44
- Chassis Modular steel trellis connected with high resistance bolts to aluminium side plates. Modular rear frame.
- Front suspension Upside down fork with 43 stanchions. 120 mm wheel travel.
- Rear suspension Aluminium alloy swingarm with stiffener brace.
- Hydraulic shock absorber with adjustable rebound and preload. 130 mm wheel travel.
Brakes
- Front: Dual 320 mm diam. wave stainless steel floating disc. Radial callipers with four pistons.
- Metal braided brake pipe.
- 2-channel Continental ABS system
- Rear: 240 mm stainless steel wave disc. Single piston calliper. Metal braided brake pipe.
- Wheel rims Aluminium alloy
- Front: 3.50 X 17" Rear: 5.5 x 17"
- Tyres Tubeless radial;
- front: 120/70 ZR 17
- rear: 180/55 ZR 17
Dimensions
- Max. length 2,265 mm
- Max. width 810 mm (at handlebar)
- Max. height 1,135 mm (at instrument panel)
- Saddle height 800 mm
- Centre to centre distance 1,440 mm
- Trail 109 mm
- Steering angle 25.7°
- Tank 15 lt
2012 Aprilia Shiver 750 Review and Specifications
0 Comments